Example for using the multi target mode for the objective¶
Example for using the multi target mode for the objective. It uses a desirability value to handle several targets.
This example assumes some basic familiarity with using BayBE.
We thus refer to campaign for a basic example.
Necessary imports for this example¶
import pandas as pd
from baybe import Campaign
from baybe.objectives import DesirabilityObjective
from baybe.parameters import CategoricalParameter, NumericalDiscreteParameter
from baybe.searchspace import SearchSpace
from baybe.targets import NumericalTarget
from baybe.utils.dataframe import add_fake_measurements
Experiment setup and creating the searchspace¶
Categorical_1 = CategoricalParameter("Cat_1", values=["22", "33"], encoding="OHE")
Categorical_2 = CategoricalParameter(
"Cat_2",
values=["very bad", "bad", "OK", "good", "very good"],
encoding="INT",
)
Num_disc_1 = NumericalDiscreteParameter(
"Num_disc_1", values=[1, 2, 3, 4, 6, 8, 10], tolerance=0.3
)
Num_disc_2 = NumericalDiscreteParameter(
"Num_disc_2", values=[-1, -3, -6, -9], tolerance=0.3
)
parameters = [Categorical_1, Categorical_2, Num_disc_1, Num_disc_2]
searchspace = SearchSpace.from_product(parameters=parameters)
Defining the targets¶
The multi target mode is handled when creating the objective object. Thus we first need to define the different targets.
This examples has different targets with different modes. The first target is maximized and while the second one is minimized. Note that in this multi target mode, the user must specify bounds for each target.
Target_1 = NumericalTarget(
name="Target_1", mode="MAX", bounds=(0, 100), transformation="LINEAR"
)
Target_2 = NumericalTarget(
name="Target_2", mode="MIN", bounds=(0, 100), transformation="LINEAR"
)
For each target it is also possible to specify a target_transform function.
A detailed discussion of this functionality can be found at the end of this example.
In this example, define a third target working with the mode MATCH.
We furthermore use target_transform="BELL".
Target_3 = NumericalTarget(
name="Target_3", mode="MATCH", bounds=(45, 55), transformation="BELL"
)
Note that the MATCH mode seeks to have the target at the mean between the two bounds.
For example, choosing 95 and 105 will lead the algorithm seeking 100 as the optimal
value.
Thus, using the bounds, it is possible to control both the match target and
the range around this target that is considered viable.
Creating the objective¶
Now to work with these three targets the objective object must be properly created.
The mode is set to DESIRABILITY and the targets are described in a list.
targets = [Target_1, Target_2, Target_3]
As the recommender requires a single function, the different targets need to be
combined.
Thus, a scalarizer is used to create a single target out of the several targets given.
The combine function can either be the mean MEAN or the geometric mean GEOM_MEAN.
Per default, GEOM_MEAN is used.
Weights for each target can also be specified as a list of floats in the arguments
Per default, weights are equally distributed between all targets and are normalized
internally.
It is thus not necessary to handle normalization or scaling.
objective = DesirabilityObjective(
targets=targets,
weights=[20, 20, 60],
scalarizer="MEAN",
)
print(objective)
Objective
Type: DesirabilityObjective
Targets
Type Name ... Transformation Weight
0 NumericalTarget Target_1 ... LINEAR 20.0
1 NumericalTarget Target_2 ... LINEAR 20.0
2 NumericalTarget Target_3 ... BELL 60.0
[3 rows x 7 columns]
Scalarizer: MEAN
Creating and printing the campaign¶
campaign = Campaign(searchspace=searchspace, objective=objective)
print(campaign)
Campaign
Meta Data
Batches done: 0
Fits done: 0
Discrete Subspace Meta Data
Recommended: 0/280
Measured: 0/280
Excluded: 0/280
SearchSpace
Search Space Type: DISCRETE
SubspaceDiscrete
Discrete Parameters
Name Type Num_Values
Encoding 0 Cat_1 CategoricalParameter 2 CategoricalEncoding.OHE 1 Cat_2 CategoricalParameter 5 CategoricalEncoding.INT 2 Num_disc_1 NumericalDiscreteParameter 7 None 3 Num_disc_2 NumericalDiscreteParameter 4 None Experimental Representation Cat_1 Cat_2 Num_disc_1 Num_disc_2 0 22 OK 1.0 -9.0 1 22 OK 1.0 -6.0 2 22 OK 1.0 -3.0 .. … … … … 277 33 very good 10.0 -6.0 278 33 very good 10.0 -3.0 279 33 very good 10.0 -1.0
[280 rows x 4 columns]
Constraints
Empty DataFrame
Columns: []
Index: []
Computational Representation
Cat_1_22 Cat_1_33 ... Num_disc_1 Num_disc_2
0 1.0 0.0 ... 1.0 -9.0
1 1.0 0.0 ... 1.0 -6.0
2 1.0 0.0 ... 1.0 -3.0
.. ... ... ... ... ...
277 0.0 1.0 ... 10.0 -6.0
278 0.0 1.0 ... 10.0 -3.0
279 0.0 1.0 ... 10.0 -1.0
[280 rows x 5 columns]
Objective
Type: DesirabilityObjective
Targets
Type Name ... Transformation Weight
0 NumericalTarget Target_1 ... LINEAR 20.0
1 NumericalTarget Target_2 ... LINEAR 20.0
2 NumericalTarget Target_3 ... BELL 60.0
[3 rows x 7 columns]
Scalarizer: MEAN
TwoPhaseMetaRecommender
Initial recommender
RandomRecommender
Compatibility: SearchSpaceType.HYBRID
Recommender
BotorchRecommender
Surrogate
GaussianProcessSurrogate
Supports Transfer Learning: True
Kernel factory: DefaultKernelFactory()
Acquisition function: qLogExpectedImprovement()
Compatibility: SearchSpaceType.HYBRID
Sequential continuous: False
Hybrid sampler: None
Sampling percentage: 1.0
Switch after: 1
Remain switched: False
Has switched: False
Performing some iterations¶
The following loop performs some recommendations and adds fake results. It also prints what happens to internal data.
N_ITERATIONS = 3
for kIter in range(N_ITERATIONS):
rec = campaign.recommend(batch_size=3)
add_fake_measurements(rec, campaign.targets)
campaign.add_measurements(rec)
desirability = campaign.objective.transform(campaign.measurements, allow_extra=True)
print(f"\n\n#### ITERATION {kIter+1} ####")
print("\nRecommended measurements with fake measured results:\n")
print(rec)
print("\nInternal measurement database with desirability values:\n")
print(pd.concat([campaign.measurements, desirability], axis=1))
#### ITERATION 1 ####
Recommended measurements with fake measured results:
Cat_1 Cat_2 Num_disc_1 Num_disc_2 Target_1 Target_2 Target_3
213 33 good 6.0 -6.0 26.336600 9.741570 52.123504
139 22 very good 10.0 -1.0 97.398088 53.258727 52.563415
44 22 bad 6.0 -9.0 19.833876 41.798561 56.270469
Internal measurement database with desirability values:
Cat_1 Cat_2 Num_disc_1 Num_disc_2 Target_1 Target_2 Target_3 \
0 33 good 6.0 -6.0 26.336600 9.741570 52.123504
1 22 very good 10.0 -1.0 97.398088 53.258727 52.563415
2 22 bad 6.0 -9.0 19.833876 41.798561 56.270469
BatchNr FitNr Desirability
0 1 NaN 0.781447
1 1 NaN 0.814387
2 1 NaN 0.429366
#### ITERATION 2 ####
Recommended measurements with fake measured results:
Cat_1 Cat_2 Num_disc_1 Num_disc_2 Target_1 Target_2 \
index
111 22 very bad 10.0 -1.0 65.358680 57.098173
134 22 very good 8.0 -3.0 16.811712 87.107385
205 33 good 3.0 -6.0 27.701780 5.853072
Target_3
index
111 51.006449
134 51.165858
205 52.695433
Internal measurement database with desirability values:
Cat_1 Cat_2 Num_disc_1 Num_disc_2 Target_1 Target_2 Target_3 \
0 33 good 6.0 -6.0 26.336600 9.741570 52.123504
1 22 very good 10.0 -1.0 97.398088 53.258727 52.563415
2 22 bad 6.0 -9.0 19.833876 41.798561 56.270469
3 22 very bad 10.0 -1.0 65.358680 57.098173 51.006449
4 22 very good 8.0 -3.0 16.811712 87.107385 51.165858
5 33 good 3.0 -6.0 27.701780 5.853072 52.695433
BatchNr FitNr Desirability
0 1 1.0 0.781447
1 1 1.0 0.814387
2 1 1.0 0.429366
3 2 NaN 0.804488
4 2 NaN 0.643318
5 2 NaN 0.762551
#### ITERATION 3 ####
Recommended measurements with fake measured results:
Cat_1 Cat_2 Num_disc_1 Num_disc_2 Target_1 Target_2 \
index
223 33 good 10.0 -1.0 64.621127 60.735103
276 33 very good 10.0 -9.0 69.604332 10.781874
152 33 OK 4.0 -9.0 11.543787 69.900528
Target_3
index
223 54.734368
276 52.784540
152 51.605906
Internal measurement database with desirability values:
Cat_1 Cat_2 Num_disc_1 Num_disc_2 Target_1 Target_2 Target_3 \
0 33 good 6.0 -6.0 26.336600 9.741570 52.123504
1 22 very good 10.0 -1.0 97.398088 53.258727 52.563415
2 22 bad 6.0 -9.0 19.833876 41.798561 56.270469
3 22 very bad 10.0 -1.0 65.358680 57.098173 51.006449
4 22 very good 8.0 -3.0 16.811712 87.107385 51.165858
5 33 good 3.0 -6.0 27.701780 5.853072 52.695433
6 33 good 10.0 -1.0 64.621127 60.735103 54.734368
7 33 very good 10.0 -9.0 69.604332 10.781874 52.784540
8 33 OK 4.0 -9.0 11.543787 69.900528 51.605906
BatchNr FitNr Desirability
0 1 1.0 0.781447
1 1 1.0 0.814387
2 1 1.0 0.429366
3 2 2.0 0.804488
4 2 2.0 0.643318
5 2 2.0 0.762551
6 3 NaN 0.591006
7 3 NaN 0.831456
8 3 NaN 0.653124
Addendum: Description of transformation functions¶
This function is used to transform target values to the interval [0,1] for MAX/MIN
mode.
An ascending or decreasing LINEAR function is used per default.
This function maps input values in a specified interval [lower, upper] to the interval
[0,1].
Outside the specified interval, the function remains constant, that is, 0 or 1.
For the match mode, two functions are available TRIANGULAR and BELL.
The TRIANGULAR function is 0 outside a specified interval and linearly increases to 1
from both
interval ends, reaching the value 1 at the center of the interval.
This function is used per default for MATCH mode.
The BELL function is a Gaussian bell curve, specified through the boundary values of
the sigma
interval, reaching the maximum value of 1 at the interval center.