Example for using the multi target mode for the objective¶
Example for using the multi target mode for the objective. It uses a desirability value to handle several targets.
This example assumes some basic familiarity with using BayBE.
We thus refer to campaign for a basic example.
Necessary imports for this example¶
import pandas as pd
from baybe import Campaign
from baybe.objectives import DesirabilityObjective
from baybe.parameters import CategoricalParameter, NumericalDiscreteParameter
from baybe.searchspace import SearchSpace
from baybe.targets import NumericalTarget
from baybe.utils.dataframe import add_fake_measurements
Experiment setup and creating the searchspace¶
Categorical_1 = CategoricalParameter("Cat_1", values=["22", "33"], encoding="OHE")
Categorical_2 = CategoricalParameter(
"Cat_2",
values=["very bad", "bad", "OK", "good", "very good"],
encoding="INT",
)
Num_disc_1 = NumericalDiscreteParameter(
"Num_disc_1", values=[1, 2, 3, 4, 6, 8, 10], tolerance=0.3
)
Num_disc_2 = NumericalDiscreteParameter(
"Num_disc_2", values=[-1, -3, -6, -9], tolerance=0.3
)
parameters = [Categorical_1, Categorical_2, Num_disc_1, Num_disc_2]
searchspace = SearchSpace.from_product(parameters=parameters)
Defining the targets¶
The multi target mode is handled when creating the objective object. Thus we first need to define the different targets.
This examples has different targets with different modes. The first target is maximized and while the second one is minimized. Note that in this multi target mode, the user must specify bounds for each target.
Target_1 = NumericalTarget(
name="Target_1", mode="MAX", bounds=(0, 100), transformation="LINEAR"
)
Target_2 = NumericalTarget(
name="Target_2", mode="MIN", bounds=(0, 100), transformation="LINEAR"
)
For each target it is also possible to specify a target_transform function.
A detailed discussion of this functionality can be found at the end of this example.
In this example, define a third target working with the mode MATCH.
We furthermore use target_transform="BELL".
Target_3 = NumericalTarget(
name="Target_3", mode="MATCH", bounds=(45, 55), transformation="BELL"
)
Note that the MATCH mode seeks to have the target at the mean between the two bounds.
For example, choosing 95 and 105 will lead the algorithm seeking 100 as the optimal
value.
Thus, using the bounds, it is possible to control both the match target and
the range around this target that is considered viable.
Creating the objective¶
Now to work with these three targets the objective object must be properly created.
The mode is set to DESIRABILITY and the targets are described in a list.
targets = [Target_1, Target_2, Target_3]
As the recommender requires a single function, the different targets need to be
combined.
Thus, a scalarizer is used to create a single target out of the several targets given.
The combine function can either be the mean MEAN or the geometric mean GEOM_MEAN.
Per default, GEOM_MEAN is used.
Weights for each target can also be specified as a list of floats in the arguments
Per default, weights are equally distributed between all targets and are normalized
internally.
It is thus not necessary to handle normalization or scaling.
objective = DesirabilityObjective(
targets=targets,
weights=[20, 20, 60],
scalarizer="MEAN",
)
print(objective)
Objective
Type: DesirabilityObjective
Targets
Type Name ... Transformation Weight
0 NumericalTarget Target_1 ... LINEAR 20.0
1 NumericalTarget Target_2 ... LINEAR 20.0
2 NumericalTarget Target_3 ... BELL 60.0
[3 rows x 7 columns]
Scalarizer: MEAN
Creating and printing the campaign¶
campaign = Campaign(searchspace=searchspace, objective=objective)
print(campaign)
Campaign
Meta Data
Batches done: 0
Fits done: 0
Discrete Subspace Meta Data
Recommended: 0/280
Measured: 0/280
Excluded: 0/280
SearchSpace
Search Space Type: DISCRETE
SubspaceDiscrete
Discrete Parameters
Name Type ... Encoding
nActiveValues 0 Cat_1 CategoricalParameter … CategoricalEncoding.OHE 2.0 1 Cat_2 CategoricalParameter … CategoricalEncoding.INT 5.0 2 Num_disc_1 NumericalDiscreteParameter … None NaN 3 Num_disc_2 NumericalDiscreteParameter … None NaN
[4 rows x 5 columns]
Experimental Representation
Cat_1 Cat_2 Num_disc_1 Num_disc_2
0 22 OK 1.0 -9.0
1 22 OK 1.0 -6.0
2 22 OK 1.0 -3.0
.. ... ... ... ...
277 33 very good 10.0 -6.0
278 33 very good 10.0 -3.0
279 33 very good 10.0 -1.0
[280 rows x 4 columns]
Constraints
Empty DataFrame
Columns: []
Index: []
Computational Representation
Cat_1_22 Cat_1_33 ... Num_disc_1 Num_disc_2
0 1.0 0.0 ... 1.0 -9.0
1 1.0 0.0 ... 1.0 -6.0
2 1.0 0.0 ... 1.0 -3.0
.. ... ... ... ... ...
277 0.0 1.0 ... 10.0 -6.0
278 0.0 1.0 ... 10.0 -3.0
279 0.0 1.0 ... 10.0 -1.0
[280 rows x 5 columns]
Objective
Type: DesirabilityObjective
Targets
Type Name ... Transformation Weight
0 NumericalTarget Target_1 ... LINEAR 20.0
1 NumericalTarget Target_2 ... LINEAR 20.0
2 NumericalTarget Target_3 ... BELL 60.0
[3 rows x 7 columns]
Scalarizer: MEAN
TwoPhaseMetaRecommender
Initial recommender
RandomRecommender
Compatibility: SearchSpaceType.HYBRID
Recommender
BotorchRecommender
Surrogate
GaussianProcessSurrogate
Supports Transfer Learning: True
Kernel factory: DefaultKernelFactory()
Acquisition function: None
Compatibility: SearchSpaceType.HYBRID
Sequential continuous: True
Hybrid sampler: None
Sampling percentage: 1.0
Switch after: 1
Remain switched: False
Has switched: False
Performing some iterations¶
The following loop performs some recommendations and adds fake results. It also prints what happens to internal data.
N_ITERATIONS = 3
for kIter in range(N_ITERATIONS):
rec = campaign.recommend(batch_size=3)
add_fake_measurements(rec, campaign.targets)
campaign.add_measurements(rec)
desirability = campaign.objective.transform(campaign.measurements, allow_extra=True)
print(f"\n\n#### ITERATION {kIter + 1} ####")
print("\nRecommended measurements with fake measured results:\n")
print(rec)
print("\nInternal measurement database with desirability values:\n")
print(pd.concat([campaign.measurements, desirability], axis=1))
#### ITERATION 1 ####
Recommended measurements with fake measured results:
Cat_1 Cat_2 Num_disc_1 Num_disc_2 Target_1 Target_2 Target_3
256 33 very good 2.0 -9.0 92.063960 13.538248 56.907104
144 33 OK 2.0 -9.0 20.477170 5.432714 52.772002
42 22 bad 4.0 -3.0 91.756526 4.388379 52.237054
Internal measurement database with desirability values:
Cat_1 Cat_2 Num_disc_1 Num_disc_2 Target_1 Target_2 Target_3 \
0 33 very good 2.0 -9.0 92.063960 13.538248 56.907104
1 33 OK 2.0 -9.0 20.477170 5.432714 52.772002
2 22 bad 4.0 -3.0 91.756526 4.388379 52.237054
BatchNr FitNr Desirability
0 1 NaN 0.588132
1 1 NaN 0.744617
2 1 NaN 0.917591
#### ITERATION 2 ####
Recommended measurements with fake measured results:
Cat_1 Cat_2 Num_disc_1 Num_disc_2 Target_1 Target_2 Target_3
index
46 22 bad 6.0 -3.0 47.868734 96.694782 55.930113
34 22 bad 2.0 -3.0 25.710749 2.645273 51.490519
43 22 bad 4.0 -1.0 5.544089 66.857668 55.716614
Internal measurement database with desirability values:
Cat_1 Cat_2 Num_disc_1 Num_disc_2 Target_1 Target_2 Target_3 \
0 33 very good 2.0 -9.0 92.063960 13.538248 56.907104
1 33 OK 2.0 -9.0 20.477170 5.432714 52.772002
2 22 bad 4.0 -3.0 91.756526 4.388379 52.237054
3 22 bad 6.0 -3.0 47.868734 96.694782 55.930113
4 22 bad 2.0 -3.0 25.710749 2.645273 51.490519
5 22 bad 4.0 -1.0 5.544089 66.857668 55.716614
BatchNr FitNr Desirability
0 1 1.0 0.588132
1 1 1.0 0.744617
2 1 1.0 0.917591
3 2 NaN 0.399310
4 2 NaN 0.820055
5 2 NaN 0.389477
#### ITERATION 3 ####
Recommended measurements with fake measured results:
Cat_1 Cat_2 Num_disc_1 Num_disc_2 Target_1 Target_2 Target_3
index
10 22 OK 3.0 -3.0 72.331459 81.119409 54.843727
66 22 good 3.0 -3.0 4.355837 9.296357 52.100426
180 33 bad 4.0 -9.0 18.438536 2.062215 51.384365
Internal measurement database with desirability values:
Cat_1 Cat_2 Num_disc_1 Num_disc_2 Target_1 Target_2 Target_3 \
0 33 very good 2.0 -9.0 92.063960 13.538248 56.907104
1 33 OK 2.0 -9.0 20.477170 5.432714 52.772002
2 22 bad 4.0 -3.0 91.756526 4.388379 52.237054
3 22 bad 6.0 -3.0 47.868734 96.694782 55.930113
4 22 bad 2.0 -3.0 25.710749 2.645273 51.490519
5 22 bad 4.0 -1.0 5.544089 66.857668 55.716614
6 22 OK 3.0 -3.0 72.331459 81.119409 54.843727
7 22 good 3.0 -3.0 4.355837 9.296357 52.100426
8 33 bad 4.0 -9.0 18.438536 2.062215 51.384365
BatchNr FitNr Desirability
0 1 1.0 0.588132
1 1 1.0 0.744617
2 1 1.0 0.917591
3 2 2.0 0.399310
4 2 2.0 0.820055
5 2 2.0 0.389477
6 3 NaN 0.557713
7 3 NaN 0.739446
8 3 NaN 0.810190
Addendum: Description of transformation functions¶
This function is used to transform target values to the interval [0,1] for MAX/MIN
mode.
An ascending or decreasing LINEAR function is used per default.
This function maps input values in a specified interval [lower, upper] to the interval
[0,1].
Outside the specified interval, the function remains constant, that is, 0 or 1.
For the match mode, two functions are available TRIANGULAR and BELL.
The TRIANGULAR function is 0 outside a specified interval and linearly increases to 1
from both
interval ends, reaching the value 1 at the center of the interval.
This function is used per default for MATCH mode.
The BELL function is a Gaussian bell curve, specified through the boundary values of
the sigma
interval, reaching the maximum value of 1 at the interval center.